Our Blog

Coil looping and snaking start at the decoiler. Learn the five fixes, from centered coil loading to matched tension and side guides, to keep strip flat.

An NC servo feeder reduces material waste three ways: stored recipes cut setup strip, ±0.05 mm accuracy allows tighter pitch, and stable feed cuts rejects.

Edge wave ruins parts and dies. Learn how an NC straightener feeder removes edge wave with controlled roll penetration and recipe-based flatness control.

Learn to read an NC Straightener Feeder specification sheet like an engineer: the seven parameters that matter, peak vs sustained speed, red flags in quotes, and how FANTY documents its 3-in-1 decoiler straightener feeder systems.

Learn how an NC servo feeder turns a conventional press into a flexible stamping cell: stored programs, sub-five-minute changeovers, and practical steps to cut setup time with a 3-in-1 decoiler straightener feeder.

Stop coil surface damage at the source: learn where scratches and marks come from, which decoiler design features protect the strip, and the handling habits that keep your 3-in-1 decoiler straightener feeder line clean.

Retrofit your existing press with an NC servo feeder: when it makes sense, what to check before ordering, the six-step integration process, and why FANTY is a reliable partner for press automation upgrades.

Master the straightener roll gap on an NC Straightener Feeder: why it controls strip flatness, how to read symptoms on the strip, a step-by-step setting procedure, and common mistakes to avoid.

A practical guide to understanding what drives NC Straightener Feeder pricing, comparing quotes fairly, and negotiating a price that reflects real value for your stamping line.

Discover how a modern NC Servo Feeder improves stamping line safety through interlocked guarding, press-feeder interlocks, and controlled threading, plus a complete safety program framework.

Learn how decoiler coil width capacity is rated, why oversizing and undersizing both cost money, and the calculation method to size a decoiler correctly for your coil range.

A complete maintenance guide for NC Servo Feeder systems: daily operator checks, monthly preventive maintenance, annual inspection, and operating habits that protect feed accuracy.

Understand how strip flatness and stress relief from an NC Straightener Feeder protect progressive dies from uneven wear, shock loads, and misfeeds, and how to spot the warning signs.