Combination Decoiler Straightener Feeder for 0.5~4.5 mm Thickness Steel Coil Handling Solution
| Share | |
|---|---|
| Categories | Decoiler Straightener Feeder for 0.5～4.5mm Steel Coil |
| Brand | FANTY - Stamping Automation Equipment Manufacturer |
| Model | DSF2 Series Combination Decoiler Straightener Feeder |
| Color | Standard white (other colors are available) |
| Payment | 30% T/T as deposit, rest against shipping |
| Customized Service | Yes |
| Certificate | ISO, CE |
| FOB port | FOB Shenzhen |
| Terms of Payment | L/C, Western Union |
| Download |  |
FANTY · DSF2 Series · Decoiler Straightener Feeder for 0.5～4.5mm Steel Coil
Combination Decoiler Straightener Feeder for 0.5~4.5 mm Thickness Steel Coil Handling Solution
The Combination Decoiler Straightener Feeder, also called Uncoiler Straightener Feeder — widths of 50–400 mm, material from 0.5–4.5 mm, coils to 5000 kg.
Send us your coil size, material and press data, and our engineers will confirm the right decoiler straightener feeder configuration for your line before you order.
At a glance
- 50–400 mmmax width
- 0.5–4.5 mmthickness range
- 5000 kgcoil capacity
- φ1400 mmmax coil OD
- 16-24 m/minworking speed
- AC4.4motor
Application
Where This Decoiler Straightener Feeder Works
Typical parts and production lines that this decoiler straightener feeder feeds or supports.
Automotive stamping
Chassis brackets, seat rails and structural stampings from coil.
Electronics hardware
Shield cans, connector shells and precision brackets.
Appliance manufacturing
Metal cabinets, drums and panels for white goods.
General metalworking
Hardware, fittings and custom stampings from steel coil.
Why it works
Key Features of the DSF2 Series
Width range 50–400 mm
Strip and coil widths to 50–400 mm are supported across the model range.
Coil thickness 0.5–4.5 mm
Handles material from 0.5–4.5 mm, so one machine covers your light and heavy gauges.
5000 kg coil capacity
Coils up to 5000 kg can be loaded, so the line runs longer between changes.
Coil OD up to φ1400 mm
Accepts coil outside diameters up to φ1400 mm without extra handling.
Compact footprint
Uncoiling, straightening and feeding in one integrated unit saves floor space and simplifies line layout.
Synchronized control
A single control panel manages uncoil tension, straightener roller gap and feed pitch together.
Specifications
DSF2 Series Technical Specifications
| Model | DSF2-400 | DSF2-600 | DSF2-800 | DSF2-1000 |
|---|---|---|---|---|
| Stock Width(mm) | 50–400 | 50–600 | 70–800 | 70–1000 |
| Stock Thickness(mm) | 0.5–4.5 | 0.5–4.5 | 0.5–4.5 | 0.5–4.5 |
| Max.Coil Weight(kg) | 5000 | 5000 | 7000 | 7000 |
| Max.Coil O.D.(mm) | φ1400 | φ1400 | φ1400 | φ1400 |
| Coil I.D.(mm) | φ508 | φ508 | φ508 | φ508 |
| Feed Length(mm) | 500 | 500 | 500 | 500 |
| Max.Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 |
| Work Roll Number | upper4/down3 | upper4/down3 | upper4/down3 | upper4/down3 |
| Feed Roll number | 1 | 1 | 1 | 1 |
| Main Motor(kw) | AC4.4 | AC4.4 | AC5.5 | AC7.5 |
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic |
| Reel Motor(kw) | 2.2 | 2.2 | 3.7 | 3.7 |
| Power (V) | 3Phase 220V/380V/50HZ | 3Phase 220V/380V/50HZ | 3Phase 220V/380V/50HZ | 3Phase 220V/380V/50HZ |
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Specifications are taken from the factory data sheet for this model. Tell us your coil or part data and our engineers will confirm the exact configuration before you order.
DSF2 Series assembly at the FANTY factory workshop.
Built by FANTY
Assembled, Test-Run and Packed in Our Factory
The DSF2 Series is produced in the FANTY workshop alongside our full range of decoilers, straighteners, feeders and presses. Every unit goes through the same controlled build sequence before it is released for shipment.
- 01
Load coil
Coil is placed on the mandrel and gripped by hydraulic or pneumatic expansion.
- 02
Uncoil & straighten
Strip passes through straightener rollers that remove coil curvature.
- 03
Feed to press
Servo feeder advances the strip to the exact pitch length every cycle.
- 04
Stamp & eject
Press forms the part while the feeder holds position.
On the assembly floor before test.
fanty factory.
Machines works with press.
FAQ
Decoiler Straightener Feeder Questions, Answered
What thickness range does this combination handle?
Models cover 0.2 mm to 6.0 mm depending on the series. Each model page lists the exact thickness and width rating.
How much floor space does the combination need?
A typical 3-in-1 unit needs 3–5 m of line length, compared with 6–10 m for separate machines. Exact dimensions are on the product page.
Can I use this with any punch press?
Yes. We match the feeder interface, control voltage and line height to your press. Send us your press model and we confirm compatibility.
What straightening accuracy is achieved?
Multi-roll straighteners reduce coil set to within 0.5 mm per metre, depending on material grade and thickness.
What is the delivery time?
Standard combinations ship in 25–35 working days. Custom specs may extend to 45 days.
Ready to put the DSF2 Series to work on your line?
Send us your material, coil or part data and press details. Our engineers will confirm the model, configuration and integration for your shop.
- 加载中···
Or send us messages online !
- *Phone
- *Title
- *Content
Or send us messages online !
- *Phone
- *Title
- *Content