Our Blog

A guide to cutting coil changeover time on stamping lines: where the minutes go, which decoiler and NC servo feeder features matter, and a realistic time comparison by line type.

A practical troubleshooting guide for common NC servo feeder feed errors, covering error codes, mechanical and electrical checks, and a ten-minute diagnostic sequence.

Explains how an NC straightener feeder improves strip flatness for stamping: the physics of roll straightening, common flatness defects, and why NC control makes results repeatable.

CE, UKCA, listed components and the declaration of conformity, in the order a buyer meets them. What the declaration has to name, what customs asks for, and the one case where a correctly marked machine still leaves the integrator carrying the compliance duty.

Learn how an NC Straightener Feeder boosts stamping line productivity. Setup time, scrap, accuracy, and throughput improvements with real numbers.

Learn how to size and match a decoiler to your NC Straightener Feeder. Coil weight, width, mandrel, speed matching, and alignment tips from FANTY.

Learn how to diagnose and fix NC Straightener Feeder accuracy problems. Feed length drift, slippage, misfeeds, and maintenance checklist from FANTY.

Buyer's guide for selecting the right NC Straightener Feeder model. Material parameters, straightener configuration, servo quality, and TCO.

Practical methods to measure and improve material utilization in progressive die stamping, from nesting and strip width to NC servo feeding accuracy.

A practical guide to calculating the total cost of ownership for stamping lines, with a worked comparison showing how feeding accuracy, energy and downtime drive lifetime cost.

Practical methods to measure and improve material utilization in progressive die stamping, from nesting and strip width to NC servo feeding accuracy.

A field guide to preventing coil telescoping damage: root causes, receiving inspection, safe storage and the decoiler features that stop telescopes before they start.

How to size an NC servo feeder for your press line: the five capacity parameters, synchronization with the press cycle, and common sizing mistakes.