Precision Punch Press for High-Speed Metal Forming
| Share | |
|---|---|
| Categories | Precision Punching Machine |
| Brand | FANTY - Stamping Automation Equipment Manufacturer |
| Model | C1S Series High-Speed Metal Forming Press |
| Color | Standard white (other colors are available) |
| Payment | 30% T/T as deposit, rest against shipping |
| Customized Service | Yes |
| FOB port | FOB Shenzhen |
| Terms of Payment | L/C, Western Union |
| Download |  |
FANTY · C1S Series · Precision Punching Machine As a punch press machine, this precision punch press specialized tool designed with an extended throat depth — 3.5 t of pressing force, speeds of 40–100 spm, strokes of 75 mm. Send us your coil size, material and press data, and our engineers will confirm the right precision punch press configuration for your line before you order. Application Typical parts and production lines that this precision punch press feeds or supports. Progressive-die parts for body, chassis and powertrain components. Metal cabinets, drums, shelves and panels for home appliances. Shield cans, heat sinks, connector shells and brackets. Brackets, fasteners, hinges and structural metal parts. Why it works 3.5 t of pressing force for blanking, piercing and forming operations. Running at 40–100 spm to keep pace with high-speed press cycles. Stroke range of 75 mm suits different part heights and die sets. Fitted with 5.5x4 drive as specified in the factory data sheet. Heavy-duty cast or welded frame minimizes deflection under load for consistent part quality. Eight-point or box-type guiding maintains die alignment and extends tool life. Specifications Specifications are taken from the factory data sheet for this model. Tell us your coil or part data and our engineers will confirm the exact configuration before you order. C1S Series assembly at the FANTY factory workshop. Built by FANTY The C1S Series is produced in the FANTY workshop alongside our full range of decoilers, straighteners, feeders and presses. Every unit goes through the same controlled build sequence before it is released for shipment. Upper and lower dies are aligned and clamped securely. Feeder advances the strip to the next pitch position. Slide descends and the die forms, cuts or pierces the material. Parts drop through the die or are carried out by a conveyor. On the assembly floor before test. Units in production at the factory. fanty factory. FAQ We supply presses from 25 tons to 1,000 tons in C-frame, H-frame and gantry configurations. High-speed models reach 800–1,200 SPM depending on stroke length and die complexity. Bolster and slide dimensions vary by tonnage. We provide a die-fit chart for each model to confirm compatibility. Standard features include two-hand buttons, light curtains, overload clutch and emergency stop. Additional guarding is available. Yes. Motor and control voltages are configured to your local standard before shipment. Send us your material, coil or part data and press details. Our engineers will confirm the model, configuration and integration for your shop.Precision Punch Press for High-Speed Metal Forming
At a glance
Where This Precision Punch Press Works
Automotive stamping
Appliance parts
Electronics hardware
Construction fittings
Key Features of the C1S Series
3.5 t capacity
40–100 spm operation
75 mm stroke
5.5x4 motor
Rigid frame construction
Precision slide guiding
C1S Series Technical Specifications
Model C1S-45 C1S-60 C1N-80 C1S-110 C1S-160 Nominal Pressure (Kn) 45 60 80 110 160 Rated Tonnage Point (mm) 3.5 4 4 6 6 Variable Stroke Per Minute (s.p.m) 40–100 35–90 35–80 30-60 20-50 Fixed Stroke Per Minute (s.p.m) 75 65 65 50 35 Stroke (mm) 80 120 150 180 200 Die Height (mm) 250 310 340 360 460 Slide Adjustment (mm) 60 75 80 80 100 Slide Area (mm) 400x300x60 500x360x70 560x420x70 650x470x80 700x550x90 Bolster Area (mm) 850x440x80 900x500x80 1000x550x90 1150x600x110 1250x800x140 Shank Hole (mm) φ38.1 φ50 ∅50 ∅50 ∅65 slide Adjust Device Manual operation, Electric driving Manual operation, Electric driving Manual operation, Electric driving Manual operation, Electric driving Manual operation, Electric driving Motor (KW) 5.5x4 5.5x4 7.5x4 11x4 15x4 
Assembled, Test-Run and Packed in Our Factory
Die mounting
Strip feeding
Stamp stroke
Part ejection
Precision Punch Press Questions, Answered
What tonnage range do you offer?
What is the maximum stamping speed?
What die sizes fit these presses?
What safety features are included?
Can the press voltage be customized?
Ready to put the C1S Series to work on your line?
- 加载中···
Or send us messages online !
- *Phone
- *Title
- *Content
Or send us messages online !
- *Phone
- *Title
- *Content