Precise Mechanical Gripper Feeder for High Speed Stamping Line
| Share | |
|---|---|
| Categories | Gripper Feeder |
| Brand | FANTY - Stamping Automation Equipment Manufacturer |
| Model | JSG Series High Speed Precise Mechanical Gripper Feeder |
| Color | Standard white (other colors are available) |
| Payment | 30% T/T as deposit, rest against shipping |
| Certificate | ISO, CE |
| FOB port | FOB Shenzhen |
| Terms of Payment | L/C, Western Union |
| Download |  |
FANTY · JSG Series · Gripper Feeder The Precise Mechanical Gripper Feeder is a specialized coil feeder designed for high-speed stamping lines — material from 0-2mm, widths of 0–100mm, ±0.02mm accuracy. Send us your coil size, material and press data, and our engineers will confirm the right gripper feeder configuration for your line before you order. Application Typical parts and production lines that this gripper feeder feeds or supports. Progressive-die parts for chassis, brackets and seat frames. Tiny pitch terminals, pins and shielding strips. Washing-machine drums, refrigerator shelves and metal cabinets. Chair bases, table legs and shelving brackets from coil strip. Why it works Handles material from 0-2mm, so one machine covers your light and heavy gauges. Strip and coil widths to 0–100mm are supported across the model range. ±0.02mm repeatability keeps progressive-die parts consistent part after part. Matches press stroke rates up to 1,000 SPM while maintaining consistent pitch accuracy. Servo or mechanical indexing keeps strip advancement within tight tolerances for quality parts. Tool-less roller gap and feed-length adjustments reduce changeover time between jobs. Specifications Specifications are taken from the factory data sheet for this model. Tell us your coil or part data and our engineers will confirm the exact configuration before you order. JSG Series assembly at the FANTY factory workshop. Built by FANTY The JSG Series is produced in the FANTY workshop alongside our full range of decoilers, straighteners, feeders and presses. Every unit goes through the same controlled build sequence before it is released for shipment. Material is guided into the feeder from the upstream coil line. Rollers or grippers clamp and advance the strip by the programmed pitch. The press stamps while the feeder holds position. Feeder releases and returns to the start position for the next cycle. FAQ Our feeders work with mechanical, hydraulic and servo presses. We match the feeder drive type and interface to your press model. Mechanical roll feeders reach up to 800 SPM. Servo feeders can exceed 1,000 SPM depending on strip length and thickness. Servo feeders achieve ±0.05 mm. Gripper feeders reach ±0.03 mm for thin materials. Roll feeders are typically ±0.1 mm. NC servo feeders handle 0.2–6.0 mm. Roll feeders suit 0.3–3.2 mm. Gripper feeders are ideal for 0.1–1.5 mm. Servo feeders use a touch-screen HMI with stored job recipes. Mechanical feeders synchronize through a press crank or flywheel linkage. Send us your material, coil or part data and press details. Our engineers will confirm the model, configuration and integration for your shop.Precise Mechanical Gripper Feeder for High Speed Stamping Line
At a glance
Where This Gripper Feeder Works
Automotive stamping
Electronics connectors
Appliance parts
Metal furniture
Key Features of the JSG Series
Coil thickness 0-2mm
Width range 0–100mm
±0.02mm accuracy
High-speed feeding
Precise pitch control
Quick-release setup
JSG Series Technical Specifications
Model
JSG50
JSG80
Feed angle
165°
140°
Feed length
0-50mm
0-50mm
Material thickness
0-2mm
0-2mm
Material width
0–100mm
0–100mm
Stock
1200spm
1000spm
Repeat accuracy
±0.02mm
±0.02mm
Release angle
60°
60°
Air pressure
490-590kpa
490-590kpa
Lubrication way
Forced lubrication
Forced lubrication
Assembled, Test-Run and Packed in Our Factory
Strip entry
Clamp & feed
Press stroke
Release & return
Gripper Feeder Questions, Answered
What press types are these feeders compatible with?
What is the maximum feeding speed?
What feeding accuracy can I expect?
What strip thickness range is supported?
How is the feeder controlled?
Ready to put the JSG Series to work on your line?
- 加载中···
Or send us messages online !
- *Phone
- *Title
- *Content
Or send us messages online !
- *Phone
- *Title
- *Content