Powerful Hydraulic Expansion Heavy Duty Decoiler for Efficient Steel Coil Handling
FANTY · MT-H Series · Heavy Duty Decoiler
Powerful Hydraulic Expansion Heavy Duty Decoiler for Efficient Steel Coil Handling
As uncoiler machine, this hydraulic decoiler machine suits for 2 tons above steel coil weight — widths of 70 mm – 1200 mm, material from 0.5 mm – 4.5 mm, coils to 10 t/20 t.
Send us your coil size, material and press data, and our engineers will confirm the right heavy-duty decoiler configuration for your line before you order.
At a glance
- 70 mm – 1200 mmmax width
- 0.5 mm – 4.5 mmthickness range
- 10 t/20 tcoil capacity
- 0–16mworking speed
Application
Where This Heavy-Duty Decoiler Works
Typical parts and production lines that this heavy-duty decoiler feeds or supports.
Automotive stamping
Body panels, brackets and chassis parts from steel coil.
Electrical components
Motor laminations, switch housings and terminal strips.
Appliance metal parts
Washing-machine drums, refrigerator shelves and oven frames.
Construction hardware
Fasteners, brackets and structural fittings from coil steel.
Why it works
Key Features of the MT-H Series
Width range 70 mm – 1200 mm
Strip and coil widths to 70 mm – 1200 mm are supported across the model range.
Coil thickness 0.5 mm – 4.5 mm
Handles material from 0.5 mm – 4.5 mm, so one machine covers your light and heavy gauges.
10 t/20 t coil capacity
Coils up to 10 t/20 t can be loaded, so the line runs longer between changes.
0–16m operation
Running at 0–16m to keep pace with high-speed press cycles.
Motorized or hydraulic drive
Coils are unwound smoothly with controlled tension, protecting surface finish and keeping line speed stable.
Expandable mandrel system
Grips the coil inner diameter securely for safe handling during loading and unwinding.
Specifications
MT-H Series Technical Specifications
| Model | MT-H |
|---|---|
| Coil Width | 70 mm – 1200 mm |
| Coil Thickness | 0.5 mm – 4.5 mm (6.0 mm optional) |
| Coil Loading Weight | 10 t/20 t |
| Coil Car | yes |
| Uncoiling Speed (per minute) | 0–16m |
Specifications are taken from the factory data sheet for this model. Tell us your coil or part data and our engineers will confirm the exact configuration before you order.
MT-H Series assembly at the FANTY factory workshop.
Built by FANTY
Assembled, Test-Run and Packed in Our Factory
The MT-H Series is produced in the FANTY workshop alongside our full range of decoilers, straighteners, feeders and presses. Every unit goes through the same controlled build sequence before it is released for shipment.
- 01
Load coil
Place the coil onto the mandrel using a coil car or crane.
- 02
Expand mandrel
Pneumatic or hydraulic expansion grips the coil ID firmly.
- 03
Adjust brake
Set back tension to match line speed and coil weight.
- 04
Feed strip
Strip is pulled smoothly into the downstream machine.
On the assembly floor before test.
production at the factory.
Machines prepared for delivery.
FAQ
Heavy-Duty Decoiler Questions, Answered
What coil sizes can these decoilers handle?
Models range from 200 mm to 1,500 mm coil widths and from 500 kg to 20 tons coil weight. Tell us your coil data and we recommend the right model.
Do you provide voltage and plug customization?
Yes. Control voltage, motor voltage and plug type are configured to your local standard before shipping.
How long is production and delivery?
Standard models ship in 15–25 working days. Custom configurations may need 30–40 days. We confirm the schedule when you place the order.
What spare parts should I keep in stock?
We recommend keeping mandrel segments, brake pads and proximity sensors. A starter spare-parts list is included with every machine.
What is the warranty period?
One year from the bill of lading date. Technical support and replacement parts are available for the lifetime of the machine.
Ready to put the MT-H Series to work on your line?
Send us your material, coil or part data and press details. Our engineers will confirm the model, configuration and integration for your shop.
- 加载中···
Or send us messages online !
- *Phone
- *Title
- *Content
Or send us messages online !
- *Phone
- *Title
- *Content