The stamping automation production line can be divided into three types according to the number of assembly line machines, namely, the split type unwinding and leveling feeder production line, the two-in-one material rack and the leveling machine distribution material production line, and the three-in-one feeder production line. The most used stamping line in the medium and thin plate stamping industry is the two-in-one rack and leveling machine distribution machine production line.
The two-in-one rack and leveling machine distribution feeder production line has a smaller footprint than the three-machine independent split-type unwinding and leveling feeder production line (unwinding and leveling without special belt space on the same machine) It is easier to operate; compared to the 3-in-1 feeder production line, the assembly line cost is lower, and the procurement cost is usually less than 1/3 of the three-in-one feeder, which is also often used by stamping customers in medium and thin plate stamping. Use it for the sake of it.
Rack and leveling machine with NC feeder
The specific model of the two-in-one rack and the leveling machine distribution machine is selected according to the actual stamping material width, thickness, material thickness and stamping process. two-in-one rack and leveling machine are available in four types: thin plate, precision middle plate, ordinary middle plate and thick plate. The feeding method is available in two ways: upper feeding and lower feeding. Can be customized according to the needs of the flattening roller open type, pay special attention: Jin Zhide under the material rack and leveling machine model similar to the three-in-one feeder model, but it only has the unwinding, the whole It has two functions, and it can't be directly combined with the punch line. It must be equipped with a punch feeder to use.
The commonly used feeders in the 2-in-1 stamping automatic production line are air feeder, high-speed roller feeder and NC servo feeder. The clip feeder and gear feeder are usually used in high-speed applications, and are usually not used for racks. And the flattening machine.
Rack and leveling machine with roller feeder
The air feeder in the 2-in-1 stamping automatic production line is usually used with ordinary plate rack and leveling machine. It is used in the occasions where the stamping processing precision is not high and the speed requirement is not fast. It can make stamping with the least investment. Production is automated; precision machining uses high-speed roller feeders and NC servo feeders, both of which are high-performance and extremely low-failure feeding equipment.
Two-in-one feeder cutting production line
high-speed roller feeder adopts mechanical feeding mode, NC feeder adopts numerical control servo motor feeding mode. In comparison, high-speed roller feeder is cheaper in price of NC servo feeder, but it is applicable. The feeding accuracy and ease of operation are far less than those of the NC servo feeder. The specific model can be selected by the customer. The customer can choose the stamping processing and production, or contact our business department directly. The business staff will recommend the most suitable model match according to your material properties and stamping process characteristics.
Related Industry Knowledge
- What is leveling machine?
- Features of the straightening machine
- Brief introduction of Feeding machine
- The basic characteristics of feeding machine
- Brief introduction of Press
- Frequently asked questions about feeding machines
- Introduction of Straightening Machine
- Installation of Presses
- Mechanical use of Presses
- Press Product Features
- Similarities and differences between NC feeder ...
- Two-in-one and split material rack, leveling ma...
- Oil pressure heavy material frame common matchi...
- Feeder misfeeding detector
- Cold winter season, roller feeder use and maint...
- Pneumatic disc brake device for heavy material ...
- Inverter for heavy material frame selection device
- Hydraulic shearing device selected for three-in...
- NC feeders need to be selected according to act...
- The function and function of the heavy material...