Home > Knowledge > Content
NC feeder control punch operation method
- Dec 25, 2018 -

As the most widely used feeder type, the NC feeder can be used not only with various punches, but also with various types of processing machines such as shearing machines, hydraulic presses, molding machines, and laser cutting machines.

NC feeder use

And the control method used in combination with the punching machine and the other types of processing machines, the control method is basically used by the press cam signal to control the operation of the NC feeder, and the other equipment is mostly sent by the NC feeder. (Shear signal) controls the operation of the processing equipment.

NC feeder with punch

Of course, in the case where a few customers need it, the Jinzhide NC feeder can actually use the shear signal to control the feeding mode of the punching work, and this control mode is mainly used for the long step punching operation.

NC feeder long step cutting

When the NC feeder is used for long-step punching, because the feeding time of the feeder is long, if the standardized punching machine is used to control the continuous feeding mode of the feeder, the punch slider will reach the bottom dead center position. However, the feeding of the NC feeder has not been completed yet, which makes it impossible to achieve an accurate feeding process. Currently, the common solution on the market is to manually control the sheet punching production mode, and after the NC feeder is finished feeding, the operation is performed. The personnel control the sheet punching work, but this working method can not achieve the continuous stamping production effect.

NC feeder control punch

The really effective and reliable solution is to use the shear function of our NC feeder to control the operation mode of the punch to realize long-step continuous automatic stamping production. In actual use, another shear control line is connected from the independent electric control box of Jinzhide NC feeder to the foot switch of the punching machine, so that when the punching machine is switched to the working mode of the foot switch, the NC feeder automatically starts. After feeding, when the feeding is completed, the NC feeder will send a shear signal to control the punching machine for automatic stamping work, and realize long-distance stable automatic stamping processing production.