Home > Knowledge > Content
How to clean the vacuum feeder
- Dec 20, 2018 -

1. Loosen the clamp, remove the components of the vacuum feeder, and wash it with water (the vacuum generator at the pump head of the pneumatic vacuum feeder should not be cleaned, and it is not in contact with the material here)

2. Remove the filter assembly, blow the powder on the filter tube with compressed air, and then rinse it repeatedly with hot water. After rinsing, the compressed water will still be used to flush the water in the filter tube wall. Blowing the filter tube should be very smooth. For example, helium gas indicates that there is still water in the filter tube wall. It needs to continue to be blown off with compressed air, then dried or dried.